KSC50Q mine Second, KSC50Q pneumatic wet dust blower Features pneumatic wet dust blower: compact, small size, light weight, simple operation, easy maintenance, good safety performance. Fan blades and housing materials were corresponding friction sparks safety inspection, to ensure that there is gas in the places. This product uses air pressure as the driving force. Has a good effect of dust. This product is connected with duct diameter of 400mm. Three, KSC50Q pneumatic wet dust blower Main purpose and scope: The system will be ventilated and dust together organically, mainly for coal mine containing an explosive substance (gas and dust) environments with high dust control, dust collection High dust-free rinse, adapt to changes in the different sections of the roadway. With a wide range of applications and so on. The product of the index can reach the national coal mine safety dust technology standards, and efficient dust removal improves visibility boring machine operatives, to further improve the work efficiency, effectively prevent the occurrence of production workers pneumoconiosis, can effectively control dust explosion, to promote coal mine production safety has a special significance. Four, KSC50Q pneumatic wet dust blower use of environmental conditions: a) ambient air temperature: + 4 ℃ ~ + 40 ℃; b) the ambient air relative humidity less than 90% (+ 25 ℃ when); c) altitude does not exceed 2000m; d) no strong vibration and corrosive gases; e) installed in a hazardous explosive coal mine methane gas needed in the workplace. Five, KSC50Q pneumatic wet dust blower technical parameters required: Indicators Technical Specifications Maximum air volume (m3 / min) 50 Working resistance (Pa) 100Pa liquid to gas ratio (L / m3) ≤0.4 overall removal efficiency (%) ≥97% respirable Dust collection efficiency (%) ≥80% Working Noise [dB (A)] ≤85db supply pressure (MPa) 0.3-0.7MPa air volume (m3 / min) 50 Rated speed (r / min) 3000 gas motor model V4 continuous work the work